7 common toilet cleaning mistakes to avoid

7 common toilet cleaning mistakes to avoid

Keeping the washroom clean is a hands-on task. But it’s necessary to wipe down all surfaces, use quality disinfectants, and sanitize the area regularly to maintain good hygiene. Doing so will prevent transferring bacteria and germs from the toilet to other areas of the house. Cleaning the toilet seems straightforward enough. But here are 7 mistakes you might be making involuntarily and should avoid the next time you tackle this task.

Forgetting to clean the toilet brush
The tool designed to scrape off grime, gunk, and all the funky discoloration in a toilet also needs to be cleaned thoroughly after regular use. Not cleaning the brush leaves bacteria and viruses to harbor and transfer over to your hands the next time you pick it up.

Wiping down surfaces immediately
When you use a chemical base toilet cleaner, it is important to spray and allow the product to sit on the surface while the formula activates and does its job. Never wipe down the surface immediately after spraying it with the cleaning solution, as it will not be as effective.

Using too many cleaning products
Mixing cleaning products or repeatedly using them on the surface can cause the toilet bowl layer to erode and become discolored. Also, mixing cleaning products that contain unknown chemicals can create a lethal chain reaction releasing harmful toxins and fumes you should never inhale. Use such products carefully and as instructed only.

Using the same cloth for all surfaces
The countertops and sink areas should not be cleaned with the same cloth used to wipe down the walls of the washroom. Doing so will only transfer dirt and bacteria from one surface to another. Instead, you must use a separate set of sponges, microfiber cloth, and wipes to clean different surfaces.

Cleaning with cold water
Experts suggest using hot water to clean and scrub toilet surfaces as the heat activates the soapy formula and ensures a more thorough clean. Hot water also easily helps you break down grime and dirt.

Leaving the exhaust fan dirty
The exhaust fan blades will also get very dirty over time. Clean the blades using a wet wipe and some disinfectant to remove all bacteria and disease-causing germs that collect on the blades.

Forgetting to clean the floor mats
A wet floor mat is a potential breeding ground for bacteria and viruses. It’s also important to get these accessories washed from time to time.

Apart from these cleaning mistakes, one could also falter regarding stocking up on basic bathroom supplies, such as paper towels. These are critical to proper hygiene, as they can remove a large percentage of the bacteria that remains on the hands after washing them. Paper towels are also disposable, which makes them an ideal solution to avoid spreading germs to others.

Previous Read

Top 7 indoor purifiers for improving air quality

Air quality in and around structures can be affected by pollutants like asbestos, carbon monoxide, lead, nitrogen dioxide, radon, pesticides, indoor particulate matter, tobacco, volatile organic compounds, and wood smoke. Purifier devices are the safest and most trusted options for improving air quality. The country's air purifier market was 2.17 billion in 2020, with a growth estimation of 8.6% by 2028. Here are seven of the best indoor air purifiers to consider for your home: Blue Pure 211+ by Blueair Blueair air purifiers are reliable, and the Blue Pure 211+ can remove a wide range of pollutants and particles trapped in your home. This device has a fabric filter for dust and larger particles and a High-Efficiency Particulate Air (HEPA) filter for smaller particles like mold and bacteria. Another filter is activated by carbon that can remove other dust and odors. Blue Pure 211+ is a compact machine that has proven effective for removing airborne pollutants across 540 sq. ft., and replacements will cost around $70. Airmega AP-1512HH by Coway Coway has been leading the air purifier market for quite some time. The Airmega AP-1512HH is effective for a 361 sq. ft room size and has four filters: HEPA, washable, odor, and bipolar ion. This air purifier is the only one with ionizing functions, along with a programmable timer, four fan speeds, and a filter indicator light. It is a compact machine and one of the market's most highly rated and reviewed air purifiers. Replacement costs are also low. The company runs out of stock frequently; if you are keen on this, track its availability. Macro Pro True HEPA Air Purifier by DREO DREO's Macro Pro is an ideal low-cost air purifier with ultra-fine, HEPA, and pelletized activated carbon filters that can remove odors caused by dogs and a lot of dust. The device has three fan speeds and three additional and separate modes for sleep, turbo, and auto. DREO is fitted with sensors that can adjust the mode and speed settings based on the current air quality in the room. The replacements cost around $30. Core 400S by Levoit Levoit's Core 400S has three filtration stages: nylon, an H13 True HEPA, and activated carbon. The maximum effective room size for this air purifier is 403 sq. ft. You may have to replace the filter every six months for one year at about $50. Levoit claims the Levoit Core 4005 can capture about 99.97% of airborne particles and close to 99.99% of viruses and bacteria. This device can also capture smoke, fumes, pet odors, and cooking smells. HM400 HealthMate® by Austin Air If you want an air purifier that works in larger room sizes and is durable, you can consider the Austin Air HM 400 Healthmate. This device can remove pet dander and chemical and gaseous pollutants for a large room size of 938 sq. ft. The Austin Air HM 400 Healthmate has already been tested and proved to remove volatile organic compounds. While this air purifier is slightly higher on the cost side, it is a durable machine. Pure Cool™ Purifying Tower Fan and TP04 Air Purifier by Dyson It is a standing purifying tower fan that detects air quality in real-time. The activated carbon filter removes odors and gases, and a Glass HEPA filter captures minute allergens and pollutants. This smart machine delivers pure air throughout the room at 77 gallons per second, and it can be operated through a voice-enabled app. Dyson's combination of purification and powerful fan speed makes this product a must-buy. You can set it to nighttime mode, which functions in quiet settings with a dimmed display. HPA300 True HEPA Allergen Remover by Honeywell Honeywell's HPA 300 can purify an area of 465 sq. ft. with a disposable pre-filter and a true HEPA filter. This portable device is easy to use, has four-speed settings, and works almost silently, even in high fan speed settings. Allergens trapped in the house are effectively removed thanks to this durable product. The Honeywell HPA has one of the highest ratings for removing dust, pollen, and smoke. However, the device may need a good amount of maintenance, and replacements are expensive. The need for air purifiers The Environmental Protection Agency says that immediate exposure to household pollutants can lead to headaches, fatigue, dizziness, and irritation in the eyes, nose, or throat. While treatment can cure them, the symptoms may relapse when they come back home. The impact of air quality on people with allergies and sensitivities could be more than cold-like symptoms. Prolonged and continuous exposure to household pollutants can cause respiratory diseases, heart diseases, and cancer. Hence using an air purifier reduces the risk of such diseases. In addition, it can also remove microorganisms and protect you from viral and bacterial infections. Other methods to improve air quality Apart from using an air purifier to remove existing pollutants, pay attention to the household things and remove potential pollutants. Keep the house well ventilated. Check pipes, tanks, and water supply channels for any water leaks that may cause molds. Use professional cleaners to clean your home thoroughly.

Next Read

6 common laundry mistakes to avoid

One of the most basic rules of doing laundry is to put whites and colors in separate loads. But there is more to laundry than just picking clothes based on their color. Sometimes one can make certain mistakes that can damage the clothes and cost them a lot of money. Hence, here are some common laundry mistakes that can lead to damaged clothes, followed by tips on how one can avoid them. Using more laundry detergent than necessary Usually, people believe that adding more laundry detergent equals cleaner clothes. But this is far from the truth. In most cases, adding extra laundry detergent can lead to the development of extra suds that can remain on the clothes after the wash. So, when one wears these clothes, the sticky suds layer on the clothes can attract more dust and bacteria, affecting the quality of the clothes and compromising one's immune system. Hence, its imperative to use the recommended quantity of detergent according to the laundry load. Not sorting the load by material One of the most common laundry mistakes that can damage clothes is not sorting them based on their material. While putting white, light-colored, and dark clothes in separate loads can prove beneficial, segregating these clothes based on their fabric material can prevent damage and abrasion. For instance, if one puts heavy material clothes such as denim with delicate fabrics like chiffon, linen, and silk, the delicate ones can likely tear or become prone to permanent damage. Additionally, this grouping of clothes can be beneficial for the drying process, as all the clothes will dry faster compared to heavier fabrics. Letting the loads linger in the washer Another common laundry mistake is leaving the load in the washer and forgetting about it. While this can seem harmless, this damp load can act as a breeding ground for mold. One of the easiest ways to identify this is to look out for a musty smell from the clothes. Although high-fragrance laundry detergents can sometimes make it difficult to recognize the foul smell, it's extremely important to remove the load from the washer as soon as the cycle is complete. Overloading the washer When loading the washer, the smaller the load, the better. This is because overloading the washer tub makes the penetration of laundry detergent difficult across all pieces of clothing. This means sweat, bacteria, and stains will remain on the cloth after the wash cycle, thus affecting the quality of the clothes. So, always do smaller loads and avoid compressing the clothes to fit into the machine. Also, read the manual to check for the mentioned load number. Not preparing the clothes properly before washing A lesser-known but widely committed laundry mistake is leaving zippers and buttons open. In most cases, when one commits this mistake, the clothes become more susceptible to rips and small holes while tossed around during the wash cycle, especially jackets, jeans, and bras. This happens because the open zips, buttons, and clasps can get stuck to other pieces of clothing or threads, leading to permanent damage. So, as a precaution, always check all the clothes and take the time to close the zippers and clasps before putting them into the washer. For incredibly delicate fabrics, one can opt for mesh bags to avoid damage. Choosing the wrong washing temperature Typically most clothes must be washed in cold water to prevent problems such as bleeding of dark colors and shrinking of the clothes. So, when one uses hot water for the clothes, it can cause unnecessary stress on certain pieces of clothing. This includes increased friction, melting of fibers, and high chances of wear and tear. Such damage can potentially decrease the lifespan of the clothes and lead to them being thrown out rapidly. To prevent such problems, wash delicate clothes like wool and silk at 30 degrees. This process can work gently on the fibers and make the clothes last longer. In addition to the above-mentioned common laundry mistakes that can damage clothes, one must also avoid others. This includes rubbing stains too vigorously, overwashing the clothes, and forgetting to clear the washer filter. Also, make sure to read the manual of the washer to make optimum use of the features according to the load and fabric of the clothes.

Our Blogs

6 of the most recognized running shoe brands

6 of the most recognized running shoe brands

If you want to invest in a pair of good-quality running shoes, choose one from a brand that specializes in making them for professional and casual runners. Look for a manufacturer that offers good arch and pronation support that matches the shape and size of your feet. Generally, a pair of running shoes cost between $110 and $150, while some iconic and popular shoes may cost higher. To help you choose from the top brands, here are the leading running shoe brands that are popular among runners: Brooks Brooks is originally from Canada and operates in the U.S. The brand has been making shoes since 1914 and started making running shoes after the Olympics in 1972. The collaboration of Jerry Turner from Brooks, David Schwaber of a rubber company, and Marty Liquori, a long-distance runner, created a cushiony midsole material from ethylene vinyl acetate. Using this, they introduced the Brooks Villanova in 1975. Their pioneering innovation then became the norm for other brands making sneakers. Some of its other innovations of Brooks include a removable sock line, silicone fluid, GORE-TEX, diagonal rollbar, use of pods on the outsole, and use of flexible material under the ball of the foot. Some of the most well-known running shoes from Brooks include the MOGO series, Green Silence, PureProject, Transcend, and the DNA series.
Read More
4 timeless jewelry pieces every woman must own

4 timeless jewelry pieces every woman must own

Every woman, irrespective of age, uniquely expresses her fashion style. And accessories play an important role in the manner of expression. If you think that classic metal or gemstone jewelry is expensive or unsuitable for everyday use, it’s time to change your opinion. Some must-own timeless jewelry pieces can never go out of style. They instantly amp up your look no matter the outfit and garner eyeballs wherever you go. Make these exquisite jewelry options yours now.  Stud earrings Stud earrings are dainty yet elegant pieces of jewelry. They fit quite well on the top of your ear, emitting the right amount of sheen. It has a singular point with a post that passes through the pierced ear, connected through a backing or a clutch behind the ear. The stud, the main part of the earning, can be made of bare metal like gold, silver, or platinum and/or hold a gemstone like a diamond, ruby, sapphire, emerald, coral, or pearl. The size of the stud and the type of stone could determine the price of the pair of earrings. While stud earrings made with precious stones can be expensive, you can opt for those affordable options with semiprecious stones like turquoise, rose quartz, or garnets.
Read More
5 leading SUVs and useful buying tips

5 leading SUVs and useful buying tips

Sports utility vehicles, or SUVs, have come a long way from being mere large-family vehicles to one of the most versatile and in-demand passenger cars. They are safe, well-designed, spacious, and fun to drive. The large-SUV market segment’s revenue is estimated to reach $148.60 billion in 2022. With increasing interest and demand, many new or redesigned models have entered the market. Here are a few leading SUVs to look for: Hyundai Tucson Hyundai has redesigned the Tucson completely. The 2022 version has multiple trim levels, including a sporty N Line model and a rugged XRT model. It also has three different powertrain options: hybrid, gasoline, and plug-in hybrid. Further, the 2022 Tucson has upgraded infotainment systems, multiple rear USB ports, Wi-Fi hotspot, top-class safety features, and driver-assistance technologies like cruise control, blind-spot collision avoidance systems, and driver attention warning. The price of the 2022 Tucson starts at around $25,350. Jeep Grand Cherokee Jeep Grand Cherokee is a mid-sized SUV. The 2022 variant, redesigned to offer a smoother ride, can accommodate five passengers in its top-class interiors with comfortable and supportive seats. The car has three powertrains: the existing V-6 and V-9 and a 4xe plug-in for the hybrid variant. Rear-wheel drive is standard in all models with V-6.
Read More
Top 5 electric cars to consider in 2022

Top 5 electric cars to consider in 2022

The sale of plug-in electric vehicles is expected to rise to 20.6 million in 2025, making up 23% of new passenger car sales. Battery, plug-in hybrid, and hybrid are the three main types of electric vehicles currently being rolled out. You can choose one from either of these car types on the basis of your driving requirement and budget. Here are some of the top suggestions for electric cars to consider this year: Kia EV6 The EV6 has a stylish exterior and classy interior with hi-tech features like smart parking and vehicle loading capabilities. This five-seater offers 17.6 cubic feet of cargo space even when the seats are not folded. The car’s engine has a 77.4 kWh all-wheel-drive powertrain, 321 bhp, 605Nm of torque from twin motors through a single-speed automatic transmission, and a range of 310 miles. It is quick to power up as a 350kW charger can charge the car from 10%-80% within 18 minutes. The driver assistance feature includes an augmented reality head-up display and remote smart park assist, which helps you park into a narrow space and pull out again when you are back by pressing a few buttons. Nissan Leaf Nissan’s Leaf is one of the cheapest electric cars in the market, costing under $20,000 after taking the tax credit of $7,500.
Read More
3 important factors to consider before buying new tires

3 important factors to consider before buying new tires

New all-season tires last for about six to seven years with minimal use and about three to five years if you drive about 12,000 to 15,000 miles a year. The National Highway Traffic Safety Administration (NHTSA) estimates that worn-out tires cause 11,000 accidents every year. To ensure your safety and others on the road, you must change your tires as and when required. Before you buy them, keep the following points in mind: Know to read the tire codes Learn about the tire code to know the right tire for your automobile. If you look carefully, you will notice a code with letters and numbers on the sidewall of your tire. Knowing the tire codes is important to buy similar or better tires that fit your wheel. Some of the relevant codes you need to know when you buy a new tire are: Tire type – the first alphabets indicate the tire type P for passenger cars LT for light truck tires ST stands for special trailer tires T for temporary or spare tires Tread width The three-digit number represents the tread width, the distance between sidewall edges in millimeters, followed by a slash and a ratio. Aspect ratio A two-digit number follows the slash and indicates the tire height from bead to tread.
Read More
4 hair styling tools that give a salon-like look

4 hair styling tools that give a salon-like look

If you like to style your hair frequently without having to spend money at salons, you can invest in some basic hair styling tools. These tools can create beach waves or curls or even straighten them out. There are many hair styling tools that are versatile, easy to use, and do little or no damage to your hair. If you want to invest in hair styling tools, here are a few tools to check out: Hair straightener and curler Combining a hair straightener and curler that is suitable for all hair types allows you the freedom to try out trending hairstyles. Look for a professional straightener or curler with a ceramic or copper flat iron. Choose a flat iron that allows you to control the temperature so that you don’t damage your hair. Experts claim that setting the straightener or curler to temperatures as high as 455 degrees can help straighten the most challenging and rigid curls. The copper ceramic tools also ensure that the hair doesn’t break while you are straightening, leaving your hair straight and smooth once you are done. You can also choose regular and smart Bluetooth straighteners to help you choose the best temperature and care settings every time you use the tool.
Read More