6 Mistakes to Avoid When Changing Engine Oil
Vehicles require regular maintenance, periodic upgrades, and repairs to keep the engine and chassis in top functioning order. If this is not ensured, the mechanical issues start to mount. Experts advise paying attention to simple but important maintenance tasks to prevent a car breakdown in the middle of the road. The engine oil change is one such crucial task. This article discusses essential mistakes that should be avoided when changing the oil. Read on to learn more.
Not heating the engine
At any car service center, the provider first heats the engine before draining the oil. However, when you replace the engine oil, you might omit this step. It can be a costly mistake because oil does not flow smoothly when cold. Hence, it will take a long time to drain. Moreover, besides the long wait time for the oil to drain, some oil might be left inside, which would have drained out if it were warm. So, before replacing the engine oil, start the vehicle and let it run for five to ten minutes till it reaches the operating temperature.
Not assessing the oil between two oil changes
You can take the car to the service center regularly to get the oil checked, or you can do it on your own if you know about it. However, when new to it, you might not know the intricacies and forget to assess the oil between two changes. Ideally, you must check the oil once every week or two unless your car has a leak or burns oil. So please, do not forget this crucial step.
Using the wrong oil
By wrong oil, we mean the incorrect viscosity. All engines are different. Hence, their motor oil requirements also vary. So, if your Ford F-150 requires 5W-20 oil, you cannot replace it with 10W-40. Some people even opt for petroleum oil over diesel or vice versa. It is another dangerous mistake. But of course, you can use diesel oil in the gas engine, provided it meets the specification requirements. You can look for oil change services near you and discuss what oil specifications work best for your car’s engine.
Another blunder people make is picking something other than premium synthetic oil. In our view, you must never compromise with anything other than synthetic engine oil. You can consult with service centers like Valvoline (VOIC) oil change services, official ford instant oil change service, and quick lube oil change service near you, and they will advise you on which engine oil is suitable for your car. These oils help keep your engine sound mechanically.
Under or over-filling the oil
Always ensure that you fill in the oil up to an adequate level. If it is low, it will lead to poor lubrication of the internal engine parts, resulting in premature wear and tear. On the contrary, it can cause a foam build-up inside the engine if you overfill the oil. This impacts the hydraulic pressure and lubrication. In addition, overfilling the oil also exerts pressure on the PCV system, making the gaskets and engine seals leak. Generally, inspect the oil with the car parked on a level surface and fill it to the correct level.
Using the wrong oil filter
This is one of the most common mistakes people make while changing engine oil. Just because an oil filter spins does not mean it is the correct one for you. An oil filter helps clarify the oil, and there are many technicalities involved with it. Hence, ensure that you are using the right one. It is a good practice to swap the filter post every oil change. If you are struggling with the oil filter while changing the car oil, you can visit any oil change service near you for assistance. They will help you with your problem. You can also consult them on an ideal filter for your vehicle. Not picking the right filter size might result in oil leakage, making it impossible for the filter to work well as it cycles through. Both these situations put your engine at risk.
If you have closely observed any professional oil change service providers change the oil, you must have noticed that after changing the oil filter, they tighten it with their hands, take the oil wrench and compress it by giving it a quarter turn. It is an excellent strategy to ensure that you do not over-tighten it. Both over and under-tightening the filters can be problematic. When you over-tighten, it may break the O-ring, or the filter might strip the threading. When the O-ring breaks, the filter does not have a proper seal, resulting in an oil leak.
Reusing the oil filter gasket
When changing the car engine oil one must ensure that the gasket from the old filter is placed correctly. If not, check to see if the engine is stuck with it. The two gaskets may leak or buckle if you install a new oil filter on top of an old one, causing pressure loss. Moreover, it can harm the engine more. Also, use a small amount of the fresh oil you will pour inside to lubricate the gasket when you replace the oil filter. The filter should be taken out when changing the oil later.
Is changing oil by yourself a good idea?
While some still look for oil change services, many decide to cater to their car repairs and maintenance. It gives them a sense of accomplishment. Moreover, doing the oil change yourself is cheaper than having someone do it for you. It also ensures you get the top-quality components you paid for without any doubt. But a DIY oil change might result in brake jobs, changing spark plugs, and coolant flushes in the future. So, please be cautious while you undertake the task.
